HomeMy WebLinkAboutConstruction Specification Miscellaneous 2014-2-18 DORMAN
CONSTRUCTION, INC
GENERAL CONTRACTOR
February 18, 2014
The attached data sheets are for the SSD dugouts, they clarify the type of clear sealer used on the
underside of the roof system and on the engineered wood beam, and this was called out by
Jonathan Price at gLAs architects of Eugene and went through the standard submittal process
This product was applied by an airless spray unit.
Thanks, Jack Stock.
ill --sPZZ2 &r3 -Dzzqs
/0 et &> R atr- S?&—t Ft.ab
017117 ? SS1> j o1ou15 s 14
303 South 5th Street—Suite 135 • SPRINGFIELD OR 97477 • (541)984-0012 • FAX(541)984-0013 • CCB#68801
5:11 CONSTRUCTION\GENERAL FORMS B INFO\Letterhead Blank Format(good onel.docx Page 1 of 1
Cs:.�' AC-909 Satin
Rdda Paint
"Its the finish that counts."
Product Data Sheet
Description AN EXTERIOR PIGMENTED 100% ACRYLIC EMULSION SATIN LATEX PAINT
Certified to meet all requirements of LEED-NC credit EQ4.2 low emitting materials - paint&
521101x White Base coatings
521102x Midtone Base If
521103x Deeptone Base lrAN vdc
521104x Neutral Base I®j compliaµ Warranty Tl m �8c ust
',LOW
Basic Use A 100% acrylic latex paint in a soft satin sheen. Giving the beauty of satin to any outside paint job. It can also serve as a
durable interior finish. A very forgiving finish that helps hide imperfections in the surface, yet provides a highly washable film
that keeps a fresh painted look. AC products will extend the paint season by allowing application down to an air and surface
temperature of 35A0 F/1A0 C in dry conditions and contain ingredients that resist the growth of mold &mildew on the surface of
the film. Carries a 30 year limited warranty.
Colors tintable white to black, see Colorbase for Accent tints
Properties
VOC gr/L 89.00 Volume Solids 38.00 Odor Slight ammonia
t2%
VOC Ibs/G 0.74 Weight Solids 220/0 50.40 Thinning None Recommended
MPI # G3 Theor. Spread Rate 374.0 Weight 10.72
Gloss 60° 8.5-12.5 Wet Film Thickness 4 mils Viscosity 100 - 105 Krebs Units
•
Sheen 85° 15-20 Dry Film Thickness 1.5 mils Resistance Contains film preservatives
Tinting Type universal Toxic Properties Non-toxic as dry film Cleanup hot soapy water
Local Harvest 25-34 Light Reflectance white 90%, less on tints Packaging one &five gallons
Dry Times
At 77 degrees Fahrenheit and 50% Relative Humidity.
Dry To Touch 1 1/2 hours Dry To Sand N/A Tack Free 1 1/2 hours
Dry To Recoat 3 hours Dry To Topcoat N/A Dry To Hard 3-6 hours
Prep & Prime
Surfaces to be coated must be free of dirt, oil, mildew, excessive chalk and other foreign matter. Remove loose paint and patch holes or
cracks. Prime bare surfaces, dull or prime glossy surfaces and then scuff sand using 80 to 100 grit sandpaper on a hand sander. Remove all
sanding dust. Do not apply over unprimed metal.
New cementitious substrates may have high pH levels and should be tested before coating. If pH is above 8, prime with Rodda's First Coat
primer.
Concrete Block New Interior and Exterior: Should be filled with No. 501901x Sprayable Block Filler prior to painting for optimum
moisture resistance.
Masonry Prime with 501801x Surfbond II, Rodda Paint's First Coat primer or 512301x pHlex-tite . Should be well cured and
thoroughly clean before painting.
Metal Prime with 508901x Metal Master Primer.
Wood New wood should be primed with Rodda's 501601x First Coat prior to AC-909 finish coat. Surfaces to be repainted
should be thoroughly clean prior to painting.
corporate: 6107 N Marine Drive Portland,Oregon 97203- Rodda Paint Co. .Regional: 3838 nth Avenue South Seattle,Washington 9813d
Disclaimer-All technical advice,recommendations and services regarding this product are rendered by the Seller gratis.They are based on technical data which the Seller believes to be reliable and are intended for use by
persons having skill and know-how,at their discretion and risk.Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise.Such
recommendations,technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date: 4/4/2013-Please contact us at 800.452.2315 for additional information or questions-Page 1 of 2
•
AC-909 Satin
R dda Paint
"It's the finish that counts?
Application
Avoid application to surfaces exposed and heated from direct sunlight. Before painting, make sure air, surface and paint temperature are above
35.40 F. Do not paint if rain, snow or freezing temperatures are expected within 24 hours. Avoid application to surfaces exposed and heated
from direct sunlight.
Brush A nylon/polyester brush is recommended for this project.
Roller / Pad Use 3/8" to 3/4" nap synthetic roller cover.-Use a synthetic pad.
Airless Spray Recommend pressure 2000 to 2500 psi, using .015 to .21 tip orifice.
HVLP Reduce up to one pint per gallon with water. Accuspray 24K
Conventional Spray Reduce up to one pint per gallon with water. Recommended air pressure 40-60 psi; fluid pressure 20 psi; tip size
.0042" to .0045" with matching cap.
•
Corporate: 6107 N Marine Drive Portland,Oregon 97203- Rod do Paint Co. -Regional: 3835 4th Avenue South Seattle,Washington 98134
Disclaimer-All technical advice.recommendations and services regarding this product are rendered by the Seller gratis.They are based on technical data which the Seller believes to be reliable and are intended for use by
persons having skill and know-how,at their discretion and risk.Seller assumes no responsibility for results obtained or damages incurred from this product use by Buyer whether as recommended herein or otherwise.Such
recommendations,technical advice or services are not to be taken as a license to operate under or suggest infringement of any patent.
Last Modification Date:4/4/2013-Please contact us at 800.452.2315 for additional information or questions-Page 2 of 2