Loading...
HomeMy WebLinkAboutBusiness License Miscellaneous 2013-12-31 • •• •• •• SPRINGFIELD • �.,,.�.,,,•.. •• • • Y DEVELOPMENT SERVICESDEPAk MENT yr 225 FIFTH STREET ••• SPRINGFIELD, OR 97477 •. • • • •• ' PHONE (541)726-3753 • • • ••• FAX (541)726-3689 • • • ••• www.ci.spnngfield.orus HIGH7FFFICFENCY L;IGHTING SYSTEMS OREGONiRaIDFNTIAL•SPECIALTY CODE (ORSC) Permit No.: Jurisdiction Site Address: 15 CO Re,k� Subdivision/Lot: and/or Map and Tax Lot: By my signature below, I certify that a minimum of❑ fifty(50) percent, *❑ seventy-five (75) percent, of the permanently installed lighting fixtures in the above mentioned building have been installed with compact or linear fluorescent, or a lighting source that has a minimum efficacy of 40 lumens per input watt. (Oregon Residential Specialty Code N1107.2)1 * Check the 75% box if the additional measure selected to comply with ORSC Ni 101.1 and Table N1101.1(2) requires 75% of lighting fixtures to have energy efficient lamps. Signed: c.(.�.4/ e Date: 12/3 /13 Ow er/Ge, ral Contractor/Authorized Agent Print K Na 0SS ka,UA V\ �vr -Nam Contractor's CCB # 5 tP Li Q9 Expiration Date: 1 ORSC Section N1107.2. High-Efficiency Lighting Systems. A minimum of fifty(50)percent of the permanently installed lighting fixtures, seventy-five(75%)percent, if the selected additional energy code measures in the Table N1101.1(2)requires greater lighting efficiency, shall be installed with compact or linear fluorescent, or a lighting source that has a minimum efficacy of 40 lumens per input watt. Screw-in compact fluorescent lamps comply with this requirement. The Building official shall be notified in writing at the final inspection that a minimum of the required percentage of the permanently installed lighting fixtures are compact or linear fluorescent, or a minimum efficacy of 40 lumens per input watt. CAHigh-Efficiency Inter.doc SPRINGF1la BUILDING EUGENE LANE -COUNTY Ink Dr:PARTMENT. LLC OcEGON Exterior Wall Envelope SeIfECerta#icration Form 1, cijS \taxik,■d , am the general contractor or the owner-builder at the following address: I SnO I�P.1l Street Address r ,t_r. It 1C C \ . City Permit# To conform to the 2011 Oregon Residential Specialty Code (ORSC), Section R703.1.1, I am notifying the building official that I am aware of the exterior wall envelope requirements of R703.1.1, and hereby certify that the components of the exterior wall envelope have been installed in accordance with the code requirements. [Section R703.1.1 is provided for reference on the reverse side of this form.] Print Name —A7-C Signature I 2/310 Date • Revised: 2/8/2010 r • •• •• •• �• SPRINGFIELD -- • CITY hOF SPRINGF:�w 'Ernitl _ : r DEVELOPMENT SERVICES DEPARTMENT '' 225 FIFTH STREET ••• ••• • • SPRINGFIELD, OR 97477• • •• • • • • •• (541) 726-3753• Moisture Content Acknowledgement Form I, I 1("cs .•: „amthe general contractor or the owner-builder at the following address: ••• • 56)0 JCeTk� Street Address 1-11AC,Flefirl City Permit# If applicable: Subdivision/Lot and/or Map and Tax Lot To conform with the 2011 Oregon-Residential Specialty Code (ORSC), Section R318.2, I am notifying the building official that I am aware of the moisture content requirement of ORSC Section R318.2 and.lave.taken steps to meet this code requirement. [Section R318.2 is provided for reference.] Section R318.2 Moisture content. Prior to issuance of.the-insulation/vapor barrier approval required by R109.1.5.2 of this code: (A) All moisture-sensitive wood framing members,used in construction shall have a moisture content of not more than 19 percent of the weight of dry wood framing members. (B) The general contractor or the owner who was issued the structural permit shall notify the building official on a division approved form that the contractor or the owner who was issued the structural permit is aware of and has taken steps to meet the requirement in paragraph (A). Print Name: ROS _ ,43,,11,c--WICAL) Signature? . Date 1 213 t II, H T:\Building forms -